Roseville Electric Utility's Commercial Lighting Rebate Program is designed to provide energy efficiency rebates to all business customers who upgrade to LED light fixtures that result in saving of energy (kWh).

Rebates up to $0.15 per kilowatt hour (kWh) reduced, as determined through completion of the attached lighting schedule.
Participating contractors
     • Must have a City of Roseville business license.
     • Must accept the Roseville Electric Utility Contractor Code of Conduct.
     • Permits are required for this program. 

Commercial lighting

Lighting Rebate

LIGHTING MEASURE DETAILS

LED T8 Lamps 

The LED tube must be 4-foot and designated as UL Type B, UL Type A+B, or UL Type C. UL Type A+B (dual mode) lamps must be installed in a Type B configuration with the existing ballast removed.

The lamp must be listed under the Primary Use Category “Internal Driver/Line Voltage (UL Type B) Lamps”, “Dual Mode Internal Driver (UL Type A and Type B)”, “2-Lamp External Driver (UL Type C) Lamps”, “3-Lamp External Driver (UL Type C) Lamps”, “4-Lamp External Driver (UL Type C) Lamps” on the current Design Lights Consortium qualified product list.

The LED tube must be compatible with the installed system lighting controls. For example, if the lighting system includes dimming controls, the new LED tube must be dimmable and compatible with the installed dimming system.

LED, High and Low Bay

LED High or Low Bays must replace a lumen equivalent fixture of higher wattage.

The LED fixture or retrofit kit must be listed in the Technical Requirements table (V5.1) by the DLC under the General Category “High Bay” and under the Primary Use Designations as follows:

High-Bay Aisle Luminaires

High-Bay Luminaires for Commercial and Industrial Buildings

Low-Bay Luminaires for Commercial and Industrial Buildings

Retrofit Kits for High-Bay Luminaires for Commercial and Industrial Buildings

Retrofit Kits for Low-Bay Luminaires for Commercial and Industrial Buildings

Exclusions

Horticultural installations are not eligible.

Screw-based lamps are not eligible.

Tube LEDs (TLEDs) are not eligible as measure case equipment.


Contact us at 916.746.1618 for any custom or specialized lighting installation projects.


Please see our Business Lighting Program Application for full details on participation and eligibility.

 

Program Requirements

Prior to purchasing equipment and starting to work on the project, an applicant must:

Fill out and submit Reservation Form A

Fill out and submit lighting schedule found here.

Provide the manufacture's specification sheet. 

A detailed lighting map showing location and lamp style is required on projects larger than 30.

Proof  of approval from  Design Light Consortium (DLC) version 5.1 for each style of lighting proposed. 

Permits are required for this program and the permit number will required before a reservation can be made. Please note, a finalized permit will also be required prior to any rebate bein paid out. 

Pre and Post photos of each style of lighting is required. If a UL Type A+B (dual mode) lamp is installed, a photo of it wired in a Type B configuration with the existing ballast removed is also required. 

Once the project is complete, please provide completed Form B and Form C. 

This rebate program can cover up-too $25,000 for any one project/customer address. 



Apply For Your Rebate

Print Application


* Terms and conditions can be found on the the print application.

Reservations are required.  Follow the guidelines as listed on the application form. 

This program has a limited budget and will be available until funds are depleted.

Reservations for funds will be accepted on a first-come, first served basis.


Contact Us

Please contact your trusted energy advisor or program manager at 916-746-1618 to assist with your rebate application or answer questions about your energy needs.

For any custom or specialized lighting installation projects, please contact us.